Specifications

Command Groups
A-130
beacon-interval
Thiscommandconfigurestherateatwhichbeaconsignalsaretransmittedfromtheaccesspoint.
Syntax
beacon-interval <interval>
intervalistheratefortransmittingbeaconsignals.Range: 20‐1000 milliseconds .
Default Setting
100
Command Mode
InterfaceConfiguration(Wireless)
Command Usage
Thebeaconsignalsallowwirelessclientstomaintaincontactwiththeaccesspoint. Theymay
alsocarrypower‐managementinformation.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#beacon-interval 150
RoamAbout 3000(if-wireless g)#