Specifications

Command Groups
A-126
speed
Thiscommandconfiguresthemaximumdatarateatwhichastationcanconnecttotheaccess
point.
Syntax
speed <speed>
speedisthemaximumaccessspeedallowedforwirelessclients.
Options:
802.11a:6,9,12,18,24,36,48,54
802.11bonly:1,2,5.5,11
802.11gonly,or802.11band802.11g:1,2,5.5,6,9,11,12,18,24,36,48,54Mbps
Default Setting
54Mbps
Command Mode
InterfaceConfiguration(Wireless)
Command Usage
•Themaximumtransmissiondistanceisaffectedbythedatarate.Thelowerthedatarate,
thelongerthetransmissiondistance.Pleaserefertothetableformaximumdistancesin
AppendixC.
•Whenturbomodeisenabled(seeturbopageA‐128)for802.11a,theeffectivemaximum
speedspecifiedby
thiscommandisdoubletheenteredvalue(e.g.,settingthe speedto54
Mbpslimitstheeffectivemaximumspeedto108Mbps).
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#speed 36
RoamAbout 3000(if-wireless g)#