Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-125
secure-access
Thiscommanddeniesaccesstoclientswithoutapre‐configuredSSID.Usethenoformtodisable
thisfeature.
Syntax
secure-access
no secure-access
Default Setting
Enabled
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
•UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
•WhenSSIDbroadcastisdisabled,theaccesspointwillnotincludeitsSSIDinbeacon
messages.Norwillitrespondtoproberequestsfromclientsthatdonotincludeafixed
SSID.
TheaccesspointallowsaccessonlytoclientsthathaveafixedSSIDthatmatchesits
own.
Example
Thefollowingexampleshowssettingsecure‐accessonthedefaultinterfaceandonaVAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
RoamAbout 3000(if-wireless a)#no secure-access
RoamAbout 3000(if-wireless a)#vap 2
RoamAbout 3000(if-wireless a: VAP[2])#no secure-access
RoamAbout 3000(if-wireless a: VAP[2])#end
RoamAbout 3000(if-wireless a)#