Specifications

Command Groups
A-124
description
Thiscommandaddsadescriptiontoawirelessinterface.Usethenoformtoremovethe
description.
Syntax
description <string>
no description
stringisacommentoradescriptionforthisinterface.Range:1‐80characters
Default Setting
None
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
Example
ThefollowingexampleshowssettingthedescriptionforthedefaultinterfaceandaVAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#description RD-AP#3-G
RoamAbout 3000(if-wireless g)#vap 4
RoamAbout 3000(if-wireless g: VAP[4])#description RD-AP#3-GV4
RoamAbout 3000(if-wireless g: VAP[4])#end
RoamAbout 3000(if-wireless g)#