Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-115
cdp tx-frequency
ThiscommandspecifiesthefrequencyatwhichthisAPtransmitsCabletronDiscoveryProtocol
(CDP)hellopackets.Default:60
Syntax
cdp tx-frequency <seconds>
<seconds>amountofti me betwenAPtramission.Range:5‐900
Default Setting
60seconds
Command Mode
GlobalConfiguration
Example
Related Commands
cdpauto‐enablepageA‐111
cdpenablepageA‐113
cdphold‐timepageA‐114
showcdppageA‐116
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp tx-frequency 120
RoamAbout 3000(config)#