Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-113
cdp enable
ThiscommandenablesthisAPtouseCabletronDiscoveryProtocol(CDP)andtosend
informationaboutitselfatthespecifiedTransmitFrequency.
Syntax
cdp enable
Default Setting
Auto
Command Mode
GlobalConfiguration
Command Usage
IfyousetCDPtoenablemode,specifyatransmitfrequency.
Example
Related Commands
cdpauthenticationpageA‐110
cdpdisablepageA‐112
cdphold‐timepageA‐114
cdptx‐frequencypageA‐115
showcdppageA‐116
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp enable
RoamAbout 3000(config)#