Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-109
interface
Thiscommandconfiguresaninterfacetypeandentersinterfaceconfigurationmode.
Syntax
interface <ethernet | wireless <a | g>
•ethernetistheinterfacefor wirednetwork.
•wirelessistheinterfaceforwirelessclients.
•aisthe802.11aradiointerface.
•gisthe802.11gradiointerface.
Default Setting
None
Command Mode
GlobalConfiguration
Examples
Tospecifythe10/10 0Base‐TXnetworkinterface,enterthefollowingcommand:
Tospecifythe802.11aradiointerface,enterthefollowingcommand:
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#