Specifications

Command Groups
A-104
filter ethernet-type protocol
ThiscommandsetsafilterforaspecificEthernettype.Usethenoformtodisablefilteringfora
specificEthernettype.
Syntax
filter ethernet-type protocol <protocol>
no filter ethernet-type protocol <protocol>
protocolistheEthernetprotocoltype.(Options:ARP,RARP,Berkeley‐Trailer‐Negotiation,
LAN‐Test,X25‐Level‐3,Banyan,CDP,DECXNS,DEC‐MOP‐Dump‐Load,DEC‐MOP,
DEC‐LAT,Ethertalk,Appletalk‐ARP,Novell‐IPX(old),Novell‐IPX(new),EAPOL,Telxon‐TXP,
Aironet‐DDP,Enet‐Config‐Test)
Default Setting
None
Command Mode
GlobalConfiguration
Command Usage
Usethefilterethernet‐typeenablecommandtoenablefilteringforEthernettypesspecified
inthefilteringtable,orthenofilterethernet‐typeenablecommandtodisableallfiltering
basedonthefilteringtable.
Example
Related Commands
filterethernet‐typeenablepageA ‐103
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#filter ethernet-type protocol ARP
RoamAbout 3000(config)#