Specifications

Command Groups
A-102
filter ibss-relay
Thiscommandchangestheibss‐relaycontrolmodefromthedefault,ALLVA P,toPerVA P.Usethe
noformtochangefromPerVA P modetoAllVA P mode.
Syntax
filter ibss-relay
no filter ibss-relay
Default Setting
AllVAP
Command Mode
GlobalConfiguration
Command Usage
Settothedefaultmode,AllVA P,clientsassociatedwithanyIBSSenabledradiointerfacesand
VAPscanestablishwirelesscommunicationswitheachotherthroughtheAP.
SettoPerVA P mode,clientsassociatedwithaspecificIBSSenabledradiointerfaceorVAPcan
establishwirelesscommunicationsthroughtheAP
onlywithotherclientsassociatedwiththat
radiointerfaceorVAP.
Thiscommandcandisablewireless‐to‐wirelesscommunicationsbetweenclients
communicatingthroughtheaccesspoint.However,itdoesnotaffectcommunications
betweenwirelessclientsandthewirednetwork.
Example
Related Commands
ibss‐relay
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#filter ibss-relay
RoamAbout 3000(config)#