Specifications

Command Groups
A-96
mac-access entry
ThiscommandaddsaMACaddresstothelocalMACdatabaseontheAPandsetsthepermission
forthataddresstoallowedordenied.ThiscommandalsochangesthepermissionofaMAC
addressalreadyinthedatabase,ordeletesaMACaddressfromthedatabase.
Syntax
mac-access entry <mac-address> <allowed | delete | denied>
•mac‐addressisthephysicaladdressofclient.Entersixpairsofhexadecimaldigitsseparated
byhyphens;e.g.,00‐01‐F4‐12‐AB‐89.
•allowed‐Entryisallowedaccess.
•delete‐entryisremovedfromthelocalMACdatabase
•denied‐Entryisdeniedaccess.
Default Setting
None
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
•UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
•Theaccesspointsupportsupto1024MACaddresses.
Example
Thefollowingexampleshowssettingmac‐accessentryforthedefaultinterfaceandaVAP.
Related Commands
mac‐accesspermissionpageA‐95
showauthenticationpageA‐100
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless g)#mac-access entry 00-01-f4-cc-99-1a allowed
RoamAbout 3000(if-wireless g)#mac-access entry 00-01-f4-cc-99-1a denied
This MAC address 00-01-f4-cc-99-1a filter permission status has been changed !!
RoamAbout 3000(if-wireless g)# mac-access entry 00-01-f4-cc-99-1a delete
RoamAbout 3000(if-wireless g)#vap 4
RoamAbout 3000(if-wireless g: VAP[4])#mac-access entry 00-01-ff-cc-99 allowed
RoamAbout 3000(if-wireless g: VAP[4])#end
RoamAbout 3000(if-wireless g)#