Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-95
mac-access permission
Thiscommandsetsadefaultaction(allowordeny)forallunknownMACaddresses(thosenot
listedinthelocalMACdatabase).
Syntax
mac-access permission <allowed | denied>
•allowed‐OnlyMACaddressesenteredas“denied”intheaddressfilteringtableare
denied.
•denied‐OnlyMACaddressesenteredas“allowed”intheaddressfilteringtableare
allowed.
Default Setting
allowed
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
Example
Thefollowingexampleshowssettingmac‐accesspermissionforthedefaultinterfaceandaVAP
Related Commands
mac‐accessentrypageA‐96
showauthenticationpageA‐100
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless g)#mac-access permission denied
RoamAbout 3000(if-wireless g)#vap 3
RoamAbout 3000(if-wireless g: VAP[3])#mac-access permission denied
RoamAbout 3000(if-wireless g: VAP[3])#end
RoamAbout 3000(if-wireless g)#