Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-93
802.1x session-timeout
Thiscommandsetsthetimeperiodafterwhichaconnectedclientmustbere‐authenticate.Usethe
noformtodisable802.1xre‐authentication.
Syntax
802.1x session-timeout <seconds>
no 802.1x session-timeout
secondsisthenumberofseconds.Range:0‐65535
Default Setting
0(Disabled)
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
Example
Thefollowingexampleshowssetting802.1xsession‐timeoutforthedefaultinterfaceandaVAP
Related Commands
showinterfacewirelesspageA‐151
802.1xpageA‐89
802.1xsession‐key‐refresh‐ratepageA‐92
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#802.1x session-timeout 300
RoamAbout 3000(if-wireless a)#vap 2
RoamAbout 3000(if-wireless a: VAP[2])#802.1x session-timeout 300
RoamAbout 3000(if-wireless a: VAP[2])#
RoamAbout 3000(if-wireless a: VAP[2])#exit
RoamAbout 3000#