Specifications

Command Groups
A-92
802.1x session-key-refresh-rate
Thiscommandsetstheintervalatwhichunicastsessionkeysarerefreshedforassociatedstations
usingdynamickeying.
Syntax
802.1x session-key-refresh-rate <rate>
rateistheintervalatwhichtheaccesspointrefreshesasessionkey.Range:0‐1440minutes
Default Setting
0(Disabled)
Command Mode
InterfaceConfiguration(Wireless)
InterfaceConfiguration(Wireless):VAP
Command Usage
•UsethiscommandforthedefaultinterfaceoranyofthesevenVAPsconfigurableperradio
interface.
•Sessionkeysareuniquetoeachclient,andareusedtoauthenticateaclientconnection,and
correlatetrafficpassingbetweenaspecificclientandtheaccesspoint.
Example
Thefollowingexampleshowssettingthe802.1xsessionkeyrefreshrateforthedefaultinterface
andaVAP.
Related Commands
showinterfacewirelesspageA‐151
802.1xpageA‐89
802.1xsession‐timeoutpageA‐93
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#802.1x session-key-refresh-rate 5
RoamAbout 3000(if-wireless a)#vap 1
RoamAbout 3000(if-wireless a: VAP[1])#802.1x session-key-refresh-rate 5
RoamAbout 3000(if-wireless a: VAP[1])#exit
RoamAbout 3000#