Specifications

Command Groups
A-86
radius-server secondary
ThiscommandspecifiestheconfigurationforthesecondaryRADIUSserver.
Syntax
radius-server secondary [address] [key] [port] [port-accounting] [retransmit]
[timeout] [timeout-interim]
Usethedescriptionsoftheradius‐servercommandstosettheseparametersforthesecondary
radius‐server.
Default Setting
Seeradius‐serveraddress,radius‐serverkey,radius‐serverport,radius‐serverport‐accounting,radius‐
serverretransmit,radius‐servertimeout,radius‐servertimeout‐interim.
Command Mode
GlobalConfiguration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server secondary address 192.168.1.25
RoamAbout 3000(config)#