Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-85
radius-server timeout
ThiscommandsetstheintervalbetweentransmittingauthenticationrequeststotheRADIUS
server.
Syntax
radius-server [secondary] timeout number_of_seconds
•secondaryisthesecondaryserver.
•number_of_secondsisthenumberofsecondstheaccesspointwaitsforareplybeforere‐
sendingarequest.Ra nge:1‐60
Default Setting
5
Command Mode
GlobalConfiguration
Example
radius-server timeout-interim
Thiscommandsetstheintervaltosendaccountingupdatesfromtheaccesspointtotheserverfor
thissession.ThisvaluecanbeoverriddenbytheRADIUSserver.
Syntax
radius-server timeout [secondary] number_of_seconds
•secondaryisthesecondaryserver.
•number_of_secondsisthenumberofsecondstheaccesspointwaitsforareplybeforere‐
sendingarequest.Ra nge:60seconds(oneminute)to86400seconds(oneday)
Default Setting
3600seconds(onehour).
Command Mode
GlobalConfiguration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server timeout 10
RoamAbout 3000(config)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#radius-server timeout-interim 1800
RoamAbout 3000(config)#