Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-81
RADIUS Client Commands
RemoteAuthenticationDial‐inUserService(RADIUS)isalogonauthenticationprotocolthatuses
softwarerunningonacentralservertocontrolaccessforRADIUS‐awaredevicestothenetwork.
Anauthenticationservercontainsadatabaseofcredentials,suchasusersnamesandpasswords,
foreachwirelessclientthatrequiresaccess
totheaccesspoint.RADIUSclientcommandsare
listedinTable A‐12.
Table A-12 RADIUS Client Commands
Command Function Mode Page
radius-server address Specifies the RADIUS server GC A-82
radius-server key Sets the RADIUS encryption key GC A-82
radius-server port Sets the RADIUS server network port GC A-83
radius-server port-
accounting
Enables or disables the RADIUS server port
for accounting packets and sets the port
number
GC A-84
radius-server retransmit Sets the number of retries GC A-84
radius-server timeout Sets the interval between sending
authentication requests
GC A-85
radius-server timeout-
interim
Sets the interval to send accounting updates
from the access point to the server for this
session.
GC A-85
radius-server secondary Specifies configuration for the secondary
RADIUS server
GC A-86
show radius Shows the current RADIUS settings Exec A-87