Specifications

Command Groups
A-78
Command Usage
•Thesystempromptsfordatarequiredtocompletethecopycommand.
•OnlyaconfigurationfilecanbeuploadedtoanFTP/TFTPserver,buteverytypeoffilecan
bedownloadedtotheaccesspoint.
•
Thedestinationfilenameshouldnotcontainslashes(\or/), theleadingletterofthefile
nameshouldnotbeaperiod(.),andthemaximumlengthforfilenamesontheFTP/TFTP 
serveris255charactersor32charactersforfilesontheaccesspoint.(Validcharacters:A‐Z,
a‐z,0‐9,“.”,“‐”,“_”)
•Dueto
thesizelimitoftheflashmemory,theaccesspointonlysupportstwooperationcode
files.
Examples
Thefollowingexamplesshowhowtouploadanddownloadtheconfigurationsettingstoafileon
theTFTPserver:
Thefollowingexampleshowshowtodown loadaconfigurationfile:
RoamAbout 3000#copy config tftp
1. syscfg
2. cfg_diag
Select the type of download<1,2>: [1]:1
TFTP Destination file name:ets_310.cfg
TFTP Server IP:196.192.18.1
FTP Username:[admin]:
FTP Password:[password]:
RoamAbout 3000#
RoamAbout 3000#copy ftp file
1. Application image
2. Config file
3. Boot block image
Select the type of download<1,2,3>: [1]:2
FTP Source file name:ets_310.cfg
FTP Server IP:10.2.20.140
FTP Username:[admin]:
FTP Password:[password]:
The configuration file was properly copied over to the
system but a later setup command will override the
file. A reset is needed in order for the configuration
file changes to take place.