Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-77
bootfile
Thiscommandspecifiestheimageusedtostartupthesystem.
Syntax
bootfile <filename>
filenameisthenameoftheimagefile.
Default Setting
None
Command Mode
Exec
Command Usage
•Thefilenameshouldnotcontainslashes(\or/),theleadingletterofthefilenameshould
notbeaperiod(.),andthemaximumlengthforfilenamesis32characters.(Valid
characters:A‐Z,a‐z,0‐9,“.”,“‐”,“_”)
•Ifthefilecontains
anerror,itcannotbesetasthedefaultfile.
Example
copy
Thiscommandcopiesabootfile,codeimage,diagnostic‐configuration,orconfigurationfilefrom
anFTP/TFTPservertotheaccesspoint’sflashmemory,orcopiesaconfigurationfileordiagnostic
configurationfromthetheaccesspoint’sflashmemorytoanFTP/TFTPserver.Whenyousavethe
configurationsettingstoafile
onaFTP/TFTPserver,thatfilecanlaterbedownloadedtotheaccess
pointtorestoresystemoperation.Thesuccessofthefiletransferdependsontheaccessibilityof
theFTP/TFTPserverandthequalityofthenetworkconnection.
Syntax
copy <ftp | tftp> file
copy config <ftp | tftp>
•tftpisthekeywordthatallowsyoutocopyto/fromaTFTPserver.
•ftpisthekeywordthatallowsyoutocopyto/fromanFTPserver.
•fileisthekeywordthatallowsyoutocopyto/fromaflashmemoryfile.
•configisthekeywordthatallowsyouto
uploadtheconfigurationfilefromflashmemory.
Default Setting
None
Command Mode
Exec
RoamAbout 3000#bootfile ets-img.bin
RoamAbout 3000#