Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-67
snmp-server user
ThiscommandconfigurestheSNMPv3usersthatareallowedtomanagetheaccesspoint.Usethe
noformtodeleteanSNMPv3user.
Syntax
snmp-server user
no snmp-server user <user-name>
user‐nameistheuser‐definedstringfortheSNMPuser.(32charactersmaximum)
Default Setting
None
Command Mode
GlobalConfiguration
Command Usage
•UptotenSNMPv3userscanbeconfiguredontheaccesspoint.
•TheSNMPengineIDisusedtocomputetheauthentication/privacydigestsfromthepass
phrase.YoushouldthereforeconfiguretheengineIDwiththesnmp‐serverengine‐id
commandbeforeusingthisconfigurationcommand.
•TheaccesspointenablesSNMPv3
userstobeassignedtothreepre‐definedgroups.Other
groupscannotbedefined.Theavailablegroupsare:
– RO‐Aread‐onlygroupusing noauthenticationandnodataencryption.Usersinthis
groupusenosecurity,eitherauthenticationorencryption,inSNMPmessagestheysend
totheagent.This
isthesameasSNMPv1orSNMPv2c.
– RW Auth‐Aread/writegroupusingauthentication,butnodataencryption.Usersinthis
groupsendSNMPmessagesthatuseanMD5key/passwordforauthentication,butnota
DESkey/passwordforencryption.
– RWPriv‐Aread/writegroupusingauthenticationanddataencryption.Users
inthis
groupsendSNMPmessagesthatuseanMD5key/passwordforauthenticationandaDES
key/passwordforencryption.BoththeMD5andDESkey/passwordsmustbedefined.
•Usersmustbeassignedtogroupsthathavethesamesecuritylevels.Ifauserwhohas
“A u t h P r i v ” security(usesauthenticationandencryption)
isassignedtoaread‐only(RO)
group,theuserwillnotbeabletoaccessthe database.AnAuthPrivusermustbeassignedto
theRWPrivgroupwiththeAuthPrivsecuritylevel.
Note: If you are going to use Group Lists, you must set up the Groups before adding the SNMP
users.