Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-61
snmp-server host
ThiscommandspecifiestherecipientofanSNMPnotification.Usethenoformtoremovethe
specifiedhost.
Syntax
snmp-server host <1 | 2 |3 | 4> <host_ip_address | <host_name> <community-string>
no snmp-server hos
t
•1isthefirstSNMPhost
•2isthesecondSNMPhost
•3isthethirdSNMPhost
•4isthefourthSNMPhost
•host_ip_addressistheIPofthehost(thetargetedrecipient)
•host_nameisthenameofthehost.Range:1‐20characters
•community‐string
isthepassword‐likecommunitystringsentwiththenotification
operation.Althoughyoucansetthisstringusingthesnmp‐serverhostcommandbyitself,
werecommendthatyoudefinethisstringusingthesnmp‐servercommunitycommand
priortousingthesnmp‐serverhostcommand.Maximumlength:23characters
Default Setting
HostAddress:None
CommunityString:public
Command Mode
GlobalConfiguration
Command Usage
Thesnmp‐serverhostcommandisusedinconjunctionwiththesnmp‐serverenableserver
commandtoenableSNMPnotifications.
Example
Related Commands
snmp‐serverenableserverpageA‐60
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server host 1 10.1.19.23 WWing
RoamAbout 3000(config)#