Specifications

Command Groups
A-60
snmp-server enable server
ThiscommandenablesSNMPmanagementaccessandalsoenablesthisdevicetosendSNMP
traps(i.e.,notifications).UsethenoformtodisableSNMPserviceandtrapmessages.
Syntax
snmp-server enable server
no snmp-server enable server
Default Setting
Enabled
Command Mode
GlobalConfiguration
Command Usage
•Thiscommandenablesbothauthenticationfailurenotificationsandlink‐up‐down
notifications.
•Thesnmp‐serverhostcommandsp ecifiesthehostdevicethatwillreceiveSNMP
notifications.
Example
Related Commands
snmp‐serverhostpageA‐61
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server enable server
RoamAbout 3000(config)#