Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-57
SNMP Commands
Theaccesspointincludesanon‐boardagentthatsupportsSimpleNetworkManagementProtocol
(SNMP)versions1,2c,and3.Accesstotheon‐boardagentusingSNMPv1andv2ciscontrolled
bycommunitystrings.Tocommunicatewiththeaccesspoint,amanagementstationmustfirst
submitavalidcommunity
stringforauthentication.
AccesstotheaccesspointusingSNMPv3providesadditionalsecurityfeaturesthatcover
messageintegrity,authentication,andencryption;aswellascontrollingnotificationsthataresent
tospecifiedusertargets.
Table A‐9liststheSNMPcommandstocontrolaccesstothisaccesspointfrommanagement
stationsusing
(SNMP),aswellasthehosts thatwillreceivetrapmessages.
Table A-9 SNMP Commands
Command Function Mode Page
snmp-server community Sets up the community access string to
permit access to SNMP commands
GC A-58
snmp-server contact Sets the system contact string GC A-59
snmp-server enable server Enables SNMP service and traps GC A-60
snmp-server host Specifies the recipient of an SNMP
notification operation
GC A-61
snmp-server location Sets the system location string GC A-62
show snmp Displays the status of SNMP
communications
Exec A-63
snmp-server trap Enables specific SNMP notifications GC A-64
snmp-server engine id Sets the engine ID for SNMP v3 GC A-66
snmp-server user Sets the name of the SNMP v3 user GC A-67
snmp-server targets Configures SNMP v3 notification targets GC A-69
snmp-server filter Configures filters to send or suppress
notifications from specified OID subtrees
GC A-70
snmp-server filter-
assignments
Assigns the targets for which filters
control notifications to send
GC A-71
snmp-server group Sets the SNMPv3 group profile GC A-72
show snmp groups Displays the pre-defined SNMP v3
groups
Exec A-73
show snmp users Displays SNMP v3 user settings Exec A-74
show snmp group-assignments Displays the assignment of users to
SNMP v3 groups
Exec A-74
show snmp target Displays the SNMP v3 notification
targets
Exec A-75
show snmp filter Displays SNMP filters GC A-75
shown snmp filter-
assignments
Displays targets associated with SNMP
filters
GC A-76