Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-55
pppoe service-name
ThiscommandsetstheservicenameforthePPPoEtunnel.
Syntax
pppoe service-name <string>
stringistheservicenameassignedbytheserviceprovider.Range: 1‐63 alphanumeric
characters
Default Setting
None
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
Theservicenameisnormallyoptional,butmayberequiredbysomeserviceproviders.
Example
pppoe restart
ThiscommandrestartsthePPPoEconnectionwithupdatedparameters.
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
ThiscommandrestartsPPPoEserviceusingthemostrecentlyconfiguredparameters.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#pppoe service-name classA
RoamAbout 3000(if-ethernet)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#pppoe restart
RoamAbout 3000(if-ethernet)#