Specifications

Command Groups
A-52
pppoe remote ip
ThiscommandsetsaremoteIPaddressforthePPPoEtunnel.
Syntax
pppoe remote ip <ip-address>
ip‐addressistheIPaddressoftheremoteendofthePPPoEtunnel.
Default Setting
None
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
Ifyousetthepppoeipallocationmodetostatic,youmustusethiscommandtospecifythe
remoteIPaddressandthepppoelocalipcommandtosetthelocalIPaddress.
Example
Related Commands
pppoeipallocationmodepageA‐47
pppoelocalippageA‐51
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#pppoe remote ip 192.168.1.20
RoamAbout 3000(if-ethernet)#