Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-51
pppoe local ip
ThiscommandsetsalocalIPaddressforthePPPoEtunnel.
Syntax
pppoe local ip <ip-address>
ip‐addressistheIPaddressofthelocalendofthePPPoEtunnel.
Default Setting
None
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
Ifyousetthepppoeipallocationmodetostatic,youmustusethiscommandtospecifythe
localIPaddressandthepppoeremoteipcommandtosettheremoteIPaddress.
Example
Related Commands
pppoeipallocationmodepageA‐47
pppoeremoteippageA‐52
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#pppoe local ip 10.7.1.200
RoamAbout 3000(if-ethernet)#