Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-47
pppoe ip allocation mode
ThiscommandspecifieshowIP addressesforthePPPoEtunnelareconfiguredonthis
interface.
Syntax
pppoe ip allocation mode {automatic | static}
•automatic‐IPaddressesaredynamicallyassignedbytheISPduringPPPoEsession
initialization.
•static‐FixedaddressesareassignedbytheISPforboththelocalandremoteIPaddresses.
Default Setting
automatic
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
TheIPaddressallocationmodedependsonthetypeofserviceprovidedbytheISP.IftheISP
usesDHCPtoallocatedynamicallytheIPaddressesforthePPPoEconnection,select
automaticmode.IftheISPhasassignedstaticaddresses,selectstaticandthenenterthestatic
addressesusingthepppoe
localipandpppoeremoteipcommands.
Example
Related Commands
pppoelocalippageA‐51
pppoeremoteippageA‐52
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#pppoe ip allocation mode static
RoamAbout 3000(if-ethernet)#