Specifications

Command Groups
A-46
ip pppoe
ThiscommandenablesPPPoEontheEthernetinterface.Use thenoformtodisablePPPoEonthe
Ethernetinterface.
Syntax
ip pppoe
no ip pppoe
Default Setting
Disabled
Command Mode
InterfaceConfiguration(Ethernet)
Command Usage
TheaccesspointusesaPPPoEconnection,ortunnel,onlyformanagementtrafficbetweenthe
accesspointandaremotePPPoEserver(typicallyatanISP).Examplesofmanagementtraffic
thatmayinitiatedbytheaccesspointandcarriedoveraPPPoEtunnelareRADIUS,Syslog,or
DHCPtraffic.
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#ip pppoe
RoamAbout 3000(if-ethernet)#