Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-43
sntp-server timezone
Thiscommandsetsthetimezonefortheaccesspoint’sinternalclock.
Syntax
sntp-server timezone <hours>
hoursisthenumberofhoursbefore/afterUTC.Range:‐12to+12hours
Default Setting
None
Command Mode
GlobalConfiguration
Command Usage
ThiscommandsetsthelocaltimezonerelativetotheCoordinatedUniversalTime(UTC,
formerlyGreenwichMeanTimeorGMT),basedontheearth’sprimemeridian,zerodegrees
longitude.Todisplayatimecorrespondingtoyourlocaltime,youmustindicatethenumber
ofhoursandminutesyourtimezoneis
east(before)orwest(after)ofUTC.
Example
show sntp
ThiscommanddisplaysthecurrenttimeandconfigurationsettingsfortheSNTPclient.
Command Mode
Exec
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#sntp-server timezone +8
RoamAbout 3000(config)#
RoamAbout 3000#show sntp
SNTP Information
=========================================================
Service State : Enabled
SNTP (server 1) IP : 10.1.0.19
SNTP (server 2) IP : 192.43.244.18
Current Time : 08 : 04, Jun 20th, 2003
Time Zone : +8 (TAIPEI, BEIJING)
Daylight Saving : Enabled, from Jun, 1st to Sep, 1st
=========================================================
RoamAbout 3000#