Specifications

Command Groups
A-40
sntp-server enable
ThiscommandenablesSNTPclientrequestsfortimesynchronizationwithNTPorSNTPtime
serversspecifiedbythesntp‐serveripcommand.UsethenoformtodisableSNTPclientrequests.
Syntax
sntp-server enable
no sntp-server enable
Default Setting
Disabled
Command Mode
GlobalConfiguration
Command Usage
Thetimeacquiredfromtimeserversisusedtorecordaccuratedatesandtimesforlogevents.
WithoutSNTP,theaccesspointonlyrecordsthetimestartingfromthefactorydefaultsetat
thelastbootup(i.e.,00:14:00,January1,1970).
Example
Related Commands
sntp‐serverippageA‐39
showsntppageA‐43
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#sntp-server enable
RoamAbout 3000(config)#