Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-39
sntp-server ip
ThiscommandsetstheIPaddressoftheserverstowhichSNTPtimerequestsareissued.Usethis
commandwithnoargumentstoclearalltimeserversfromthecurrentlist.
Syntax
sntp-server ip <1 | 2> <ip address>
•1‐Firsttimeserver
•2‐Secondtimeserver
•ipaddressistheIPaddressofantimeserver(NTPorSNTP).
Default Setting
137.92.140.80
192.43.244.18
Command Mode
GlobalConfiguration
Command Usage
WhenSNTPclientmodeisenabledusingthesntp‐serverenablecommand,thesntp‐server
ipcommandspecifiesthetimeserversfromwhichtheaccesspointpollsfortimeupdates.The
accesspointwillpollthetimeserversintheorderspecifieduntilaresponseisreceived.
Example
Related Commands
sntp‐serverenablepageA‐40
showsntppageA‐43
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#sntp-server ip 1 10.1.0.19
RoamAbout 3000(config)#