Specifications

Command Groups
A-30
ip telnet-server
UsethiscommandtoenableTelnetaccesstothisaccesspoint.Usethenoversionofthiscommand
todisableTelnetaccess.
Syntax
ip telnet-server <enable>
no ip telnet-server
Default Setting
Enable
Command Mode
GlobalConfiguration
Command Usage
Telnetallowsyoutomanagetheaccesspointfromanywhereinthenetwork.Telnetisnot
securefromhostileattacks.Therefore,itisrecommendedtousetheSecureShell(SSH).
Example
Related Commands
N/A
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip telnet-server enable
RoamAbout 3000(config)#