Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-29
ip ssh-server port
UsethiscommandtosettheUDPporttousefortheSSHserver.
Syntax
ip ssh-server <port number>
portnumberistheUDPportnumbertouseforSSH.Range:1‐22,24‐79,81 ‐442,444‐2312,
2314‐65535
Default Setting
22
Command Mode
GlobalConfiguration
Command Usage
N/A
Example
Related Commands
ipssh‐serverpageA‐28
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip ssh-server port 24
RoamAbout 3000(config)#