Specifications

Command Groups
A-26
ip https port
UsethiscommandtospecifytheUDPportnumberusedforHTTPS/SSLconnectiontotheaccess
point’sWebinterface.Usethenoformtorestorethedefaultport.Range:443,1024‐65535.
Syntax
ip https port <port_number>
no ip https port
port_numberistheUDPportusedforHTTPS/SSL.Range:443,1024‐65535
Default Setting
443
Command Mode
GlobalConfiguration
Command Usage
•IfyouchangetheHTTPSportnumber,clientsattemptingtoconnecttotheHTTPSservermust
specifythe portnumberintheURL,inthisformat:https://device:port_number.
•YoucannotconfiguretheHTTPandHTTPSserverstousethesameport.
• Configurablerangerestrictedto443and1024through65535.(This
preventstheuseof
commonreservedTCPportnumbersbelow1024.)
Example
Related Commands
iphttpsserverpageA‐27
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip https port 49153
RoamAbout 3000(config)#