Specifications

Command Groups
A-24
ip http port
ThiscommandspecifiestheTCPportnumberusedbytheWebbrowserinterface.Usethenoform
tousethedefaultport.
Syntax
ip http port <port-number>
no ip http port
port‐numberistheTCPporttobeusedbythebrowserinterface.Range:80,1024‐65535
Default Setting
80
Command Mode
GlobalConfiguration
Command Usage
•IfyouchangetheHTTPportnumber,clientsattemptingtoconnecttotheHTTPservermust
specifythe portnumberintheURL,inthisformat:http://device:port_number.
•YoucannotconfiguretheHTTPandHTTPSserverstousethesameport.
• Configurablerangerestrictedto80and1024through65535.(This
preventstheuseofcommon
reservedTCPportnumbersbelow1024.)
Example
Related Commands
iphttpserverpageA‐25
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#ip http port 1024
RoamAbout 3000(config)#