Specifications

Command Groups
RoamAbout Access Point 3000 Configuration Guide A-23
password
Afterinitiallyloggingontothesystem,youshouldchangethepassword.Toresetthepasswordto
thedefaultpasswordofpassword,usethenoform.
Syntax
password password
no password
passwordisthepasswordusedformanagementaccess.Length:3‐16characters,casesensitive
Default Setting
password
Command Mode
GlobalConfiguration
Example
com-port
EnablesordisablestheAccessPoint3000’scomport.
Syntax
com-port <enable | disable>
enableallowsaccesstotheAPthroughitscomport.
disabledeniesaccesstotheAPthroughitscomport.
Default Setting
Enable
Command Mode
GlobalConfiguration
Example
Related Commands
showsystempageA‐44
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#password Az24K
Confirm new password: Az24K
RoamAbout 3000(config)#
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#com-port disable
RoamAbout 3000(config)#com-port enable
RoamAbout 3000(config)#