Specifications

Command Groups
A-16
System Management Commands
ThecommandsinTable A‐5areusedtoconfiguretheusername,password,systemlogs,browser
managementoptions,clocksettings,andavarietyof othersysteminformation.
Table A-5 System Management Commands
Command Function Mode Page
Country Setting Sets the country code for correct radio
operation
country Sets the access point country code Exec A-18
Device Designation Configures information that uniquely
identifies this device
prompt Customizes the command line prompt GC A-20
system contact Sets the system contact string GC A-21
system location Sets the system location string GC A-21
system name Specifies the host name for the access
point
GC A-22
User Access Configures the user name and password
for management access
username Configures the user name for
management access
GC A-22
password Specifies the password for management
access
GC A-23
com-port Disables or enables the Access Point
3000’s com port
GC A-23
Web Server Enables management access via a Web
browser
ip http port Specifies the port to be used by the Web
browser interface
GC A-24
ip http server Allows the access point to be monitored or
configured from a browser
GC A-25
ip https port Specifies the UDP port number used for a
secure HTTP connection to the access
point’s Web interface
GC A-26
ip https server Enables the secure HTTP server on the
access point
GC A-27
SSH Enables SSH server on the access point
ip ssh-server Enables SSH access to this access point A-28
ip ssh-server port Sets the UDP port to use for the SSH
server
A-29
Telnet Enables the Telnet server on the access
point