Specifications

Command Groups
A-10
General Commands
TheGeneralcommandsarelistedinTable A‐4.
configure
ThiscommandactivatesGlobalConfigurationmode.Youmustenterthismodetomodifymostof
thesettingsontheaccesspoint.Youmust also enterGlobalConfigurationmodepriortoenabling
thecontextmodesforInterfaceConfiguration.See“Accessing the CLI” onpage A‐1.
Default Setting
None
Command Mode
Exec
Example
Related Commands
endpageA‐11
exitpageA‐11
Table A-4 General Commands
Command Function Mode Page
configure Activates global configuration mode Exec A-10
end Returns to Exec mode GC, IC A-11
exit Returns to the previous configuration mode, or exits
the CLI
any A-11
ping Sends ICMP echo request packets to another node
on the network
Exec A-12
reset Restarts the system Exec A-13
show history Shows the command history buffer Exec A-14
show line Shows the configuration settings for the console port Exec A-15
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#