Specifications

Understanding Command Modes
RoamAbout Access Point 3000 Configuration Guide A-7
ToentertheGlobalConfigurationmode,enterthecommandconfigureinExecmode.Thesystem
promptchangesto“RoamAbout3000(config)#”whichgivesyouaccessprivilegetoallGlobal
Configurationcommands.
ToenterInterfacemode,youmustenterthe“interface ethernet,”or“interfacewirelessa,”or
“interfacewirelessg”command
whileinGlobalConfigurationmode.Thesystemprompt
changesto“RoamAbout3000(if‐ethernet)#,”orRoamAbout3000(if‐wirelessa)”indicatingthat
youhaveaccessprivilegestotheassociatedcommands.
Youcanusetheendcommandtogobackalevel,ortheexitcommandtogobacktotheExec
mode.
To
entertheVAPsub‐mode,youmustspecifythe“VA P ” commandwhileineitherthe“interface
wirelessa,”or“interfacewirelessg”configurationmodes.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#
RoamAbout 3000(config)#interface ethernet
Enter Ethernet configuration commands, one per line.
RoamAbout 3000(if-ethernet)#
RoamAbout 3000(if-ethernet)#end
RoamAbout 3000(config)#
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#
RoamAbout 3000(if-wireless a)#exit
RoamAbout 3000#
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#vap 2
RoamAbout 3000(if-wireless a: VAP[2])#
RoamAbout 3000(if-wireless a: VAP[2])#exit
RoamAbout 3000#