Specifications

Status Information
RoamAbout Access Point 3000 Configuration Guide 4-81
Using Web Management to View CDP Status
SelectCDPStatusfromthemenu.
Using the CLI to Display CDP Status
Usethecdpenableorcdpauto‐enablecommandsfromthegeneralconfigurationmodetoenable
theAPtouseCDP.SetCDPparametersusingthecdphold‐time,cdptx‐frequency,and cdp
authenticationcommands.ToviewthecurrentCDPsettings,usetheshowcdpcommandfrom
theExec
mode.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp auto-enable
RoamAbout 3000(config)#cdp hold-time 300
RoamAbout 3000(config)#cdp authentication asdfg
RoamAbout 3000(config)#cdp tx-frequency 120
RoamAbout 3000(config)#exit
RoamAbout 3000#show cdp
CDP Global Information
========================================
Global Status : Auto Enable
Authentication Code : asdfg
Transmit Frequency : 120 secs
Hold Time : 300 secs
========================================
RoamAbout 3000#