Specifications

Security
4-68 Advanced Configuration
– LocalMACFilterSettingsaddsMACaddressesandpermissionsintothelocalMAC
database.
‐ MACAddressisthephysicaladdressofaclient.Entersixpairsofhexadecimaldigits
separatedbyhyphens;forexample,00‐01‐F4‐12‐AB‐89.
‐ Permissionspecifieswhethertoallowordenyaccesstothis
MACaddress.Allow
permitsaccess;Denyblocksaccess;DeleteremovesthespecifiedMACaddressentry
fromthedatabase.
‐ UpdateentersthespecifiedMACaddressandpermissionsettingintothelocal
database.
‐ MACAuthenticationTabledisplayscurrententriesinthelocalMACdatabase.
CLI Commands for 802.1x Authentication
Usethe802.1xsupportedor802.1xrequiredcommandfromtheinterfacewirelessorinterface
wireless:VAPconfigurationmodetoenable802.1xauthentication,ortheno8021.xtodisableit.
Usethe802.1xbroadcast‐key‐refresh‐rate,802.1xbroadcast‐key‐refresh‐rate,and802.1xsession‐
timeoutcommandstosetthebroadcast
andsessionkeyrefreshrates,andthere‐authentication
timeout.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
RoamAbout 3000(if-wireless a)#802.1x supported
RoamAbout 3000(if-wireless a)#802.1x broadcast-key-refresh-rate
5
RoamAbout 3000(if-wireless a)#802.1x session-key-refresh-rate 5
RoamAbout 3000(if-wireless a)#802.1x session-timeout 300
RoamAbout 3000(if-wireless a)#
RoamAbout 3000(if-wireless a)#vap 1
RoamAbout 3000(if-wireless a: VAP[1])#802.1x supported
RoamAbout 3000(if-wireless a: VAP[1])#802.1x broadcast-key-
refresh-rate 5
RoamAbout 3000(if-wireless a: VAP[1])#802.1x session-key-
refresh-rate 5
RoamAbout 3000(if-wireless a: VAP[1])#802.1x session-timeout 300
RoamAbout 3000(if-wireless a: VAP[1])#end
RoamAbout 3000(if-wireless a)#end
RoamAbout 3000#