Specifications

4-30 Port Commands
show port media-type
DisplaystheenabledinterfacetypesonanRBT‐8400switch’sgigabitEthernetports.
Syntax
show port media-type [port-list]
Parameters
Defaults
None.
Mode
All.
Usage
ThiscommandappliesonlytotheRBT‐8400.
Example
ThefollowingcommanddisplaystheenabledinterfacetypesonallfourportsofanRBT‐8400
switch:
RBT-8400# show port media-type
Port Media Type
===========================================================
1 GBIC
2 RJ45
3 GBIC
4 GBIC
Table 4‐7describesthefieldsinthisdisplay.
Related Commands
• clearportmedia‐typeonpage 4‐5
• setportmedia‐typeonpage 4‐19
port‐list Listofphysicalports.MSSdisplaystheenabledinterfacetypesforallthe
specifiedports.
Table 4-7 Output for show port media-type
Field Description
Port Port number.
Preference Preference setting:
• GBIC—The GBIC (fiber) interface is enabled.
• RJ45—The RJ-45 (copper) interface is enabled.