Specifications

4-28 Port Commands
show port counters
Displaysportstatistics.
Syntax
show port counters [octets | packets | receive-errors | transmit-errors |
collisions | receive-etherstats | transmit-etherstats] [port
port-list]
Parameters
Defaults
None.
Mode
All.
Usage
Youcanspecifyonestatistictypewiththecommand.
Example
Thefollowingcommandshowsoctetstatisticsforport3:
RBT-8100> show port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
1 Up 27965420 34886544
Thiscommand’soutputhasthesamefieldsasthemonitorportcounterscommand.For
descriptionsofthefields,seeTable 4‐3onpage 9.
Related Commands
• clearportcountersonpage 4‐3
• monitorportcountersonpage 4‐10
octets Displaysoctetstatistics.
packets Displayspacketstatistics.
receive‐errors Displayserrorsinreceivedpackets.
transmit‐errors Displayserrorsintransmittedpackets.
collisions Displayscollisionstatistics.
receive‐etherstats DisplaysEthernetstatisticsforreceivedpackets.
transmit‐etherstats DisplaysEthernetstatisticsfortransmitted packets.
portport‐list
Listofphysicalports.Ifyoudonotspecifyaportlist,MSSdisplays
statisticsforallports.