Specifications

RoamAbout Mobility System Software Command Line Reference 4-21
set port name
Assignsanametoaport.Afternamingaport,youcanusetheportnameornumberinotherCLI
commands.
Syntax
set port port name name
Parameters
Defaults
None.
Mode
Enabled.
Usage
Tosimplifyconfigurationandavoidconfusionbetweenaport’snumberanditsname,Enterasys
Networksrecommendsthatyoudonotusenumbersasportnames.
Example
Thefollowingcommandsetsthenameofport17toadminpool:
RBT-8100# set port 17 name adminpool
success: change accepted.
Example
Thefollowingcommandassignsthenametechpubstoport5:
Related Commands
• clearportname onpage 4‐4
•
showportstatus onpage 4‐32
port Numberofaphysicalport.Youcanspecifyonlyoneport.
namename Alphanumericstringofupto16characters,withnospaces.