Specifications

RoamAbout Mobility System Software Command Line Reference 4-19
set port media-type
DisablesthefiberinterfaceandenablesthecopperinterfaceonanRBT‐8400gigabitEthernetport.
Syntax
set port media-type port-list rj45
Parameters
Defaults
TheGBIC(fiber)interfaceisenabled,andthecopperint erfaceisdisabled,bydefault.
Mode
Enabled.
UsageThis command applies only to the RBT-8400.
IfyousettheportinterfacetoRJ‐45onaportthatalreadyhasanactivefiberlink,MSS
immediatelychangesthelinktothecopperinterface.
Example
Thefollowingcommanddisablesthefiberinterfaceandenablesthecopperinterfaceonport2:
RBT-8400# set port media-type 2 rj45
Related Commands
• clearportmedia‐typeonpage 4‐5
• showportmedia‐typeonpage 4‐30
port‐list Listofphysicalports.MSSsetsthepreferenceonallthespecifiedports.
rj45 Usesthecopperinterface.