Specifications

RoamAbout Mobility System Software Command Line Reference 4-17
set port
Administrativelydisablesorreenablesaport.
Syntax
set port {enable | disable} port-list
Parameters
Defaults
Allportsareenabled.
Mode
Enabled.
Usage
Aportthatisadministrativelydisabledcannotsendorreceivepackets.Thiscommanddoesnot
affectthelinkstateoftheport.
Example
Thefollowingcommanddisablesport16:
RBT-8100# set port disable 16
success: set "disable" on port 16
Thefol1owingcommandreenablestheport:
RBT-8100# set port enable 16
success: set "enable" on port 16
Related Commands
resetportonpage 4‐11
enable Enablesthespecified ports.
disable Disablesthespecifiedports.
port‐list Listofphysicalports.MSSdisablesorre‐enablesallthespecifiedports.