Specifications

4-14 Port Commands
reset port
ResetsaportbytogglingitslinkstateandPoweroverEthernet(PoE)state.
Syntax
reset port port-list
Parameters
Defaults
None.
Mode
Enabled.
Usage
Theresetcommanddisablestheport’slinkandPoE(ifapplicable)foratleast1second,then
reenablesthem.ThisbehaviorisusefulforforcinganAccessPointthatisconnectedtotwo
RoamAboutswitchestorebootoverthelinktotheotherswitch.
Example
Thefollowingcommandresetsport5:
RBT-8100# reset port 5
<<no cli response>>
Related Commands
setportonpage 4‐17
port‐list Listofphysicalports.MSSresetsallthespecifiedports.