Specifications

RoamAbout Mobility System Software Command Line Reference 24-11
fver
DisplaystheversionofasystemimagefileinstalledinaspecificlocationonaRoamA boutswitch.
Syntax
fver {c: | d: | e: | f: | boot0: | boot1:} [filename]
Parameters
Defaults
None.
Mode
Bootprompt.
Usage
Todisplaytheimagefilenames,usethedircommand.Thiscommanddoesnotlistthebootcode
versions.Todisplaythebootcodeversions,usetheversioncommand.
Example
Thefollowingcommanddisplaysthesystemimageversioninstal ledinbootpartition1:
boot> fver boot1
File boot1:default version is 1.1.0.98.
Related Commands
• dironpage 24 ‐10
• versiononpage 24‐19
c: Nonvolatilestorageareacontainingbootpartition0(primary).
d: Nonvolatilestorageareacontainingbootpartition1(secondary).
e: Primarypartitionoftheflashcardintheflashcardslot.
f: Secondarypartitionoftheflashcardintheflashcardslot.
boot0: Bootpartition0.
boot1: Boot
partition1.
[filename]Systemimagefilename.