Specifications

23-6 System Log Commands
set log mark
ConfiguresMSStogeneratemarkmessagesatregularintervals.Themarkmessagesindicatethe
currentsystemtimeanddate.EnterasysNetworkscanusethemarkmessagestodeterminethe
approximatetimewhenasystemrestartorothereventcausingasystemoutageoccurred.
Syntax
setlogmark[enable|disable][severitylevel]
[intervalinterval]
Parameters
Defaults
Markmessagesaredisabledbydefault.Whentheyareenabled,MSSgeneratesamessageatthe
noticelevelonceevery300secondsbydefault.
Mode
Enabled.
Example
Thefollowingcommandenablesmarkmessages:
RBT-8100# set log mark enable
success: change accepted.
enable Enablesthemarkmessages.
disable Disablesthemarkmessages.
severitylevel Logseverityatwhichthemessagesarelogged:
• emergency
•alert
•critical
•error
•warning
•notice
•info
• debug
intervalinterval IntervalatwhichMSSgeneratesthemarkmessages.Youcanspecify
from1to2147483647seconds.