Specifications

23-2 System Log Commands
clear log
Clearsthelogmessagesstoredinthelogbuffer,orremovestheconfigurationforasyslogserver
andstopssendinglogmessagestothatserver.
Syntax
clear log [buffer | server ip‐addr]
Parameters
Defaults
None.
Mode
Enabled.
Examples
Tostopsendingsystemloggingmessagestoaserverat192.168.253.11, typethefollowing
command:
RBT-8100# clear log server 192.168.253.11
success: change accepted.
Typethefollowingcommandtoclearallmessagesfromthelogbuffer:
RBT-8100# clear log buffer
success: change accepted.
Related Commands
• clearlogtraceonpage 21‐2
• setlogonpage 23‐3
buffer Deletesthe logmessagesstoredinnonvolatilestorage.
serverip‐addr Deletestheconfigurationforandstopssendinglogmessagestothesyslog
serveratthisIPaddress.Specifyanaddressindotteddecimalnotation.