Specifications

RoamAbout Mobility System Software Command Line Reference 22-11
show snoop stats
Displaysstatisticsforenabledsnoopfilters.
Syntax
show snoop stats [filter-name [dap-num [radio {1 | 2}]]]
Defaults
None.
Mode
Enabled.
Usage
TheDAPretainsstatisticsforasnoopfilteruntilthefilterischangedordisabled.TheDAPthen
clearsthestatistics.
Example
Thefollowingcommandshowsstatisticsforsnoopfiltersnoop1:
RBT-8100# show snoop stats snoop1
Filter Dap Radio Rx Match Tx Match Dropped Stop-After
===============================================================================
snoop1 3 1 96 4 0 stopped
filter‐name Nameofthesnoopfilter.
dapdap‐num NumberofaDAPtowhichthesnoopfilterismapped.
radio1 Radio1oftheDAP.
radio2 Radio2oftheDAP.(Thisoptiondoesnotapplytosingle‐radiomodels.)